Hydac LF Filter Low Psi

Inline filter
  • Flow rates up to 500 l/min
  • Pressure levels up to 100 bar
  • Connections: G½ to G1½
  • Installation sizes: 30, 60, 110, 160, 240, 330, 660

SKU: Hydac_LF_Filter_Low_Psi Category:


• Non-welded housing design reduces stress concentrations and prevents fatigue failure.


• Aluminum alloy is water tolerant - anodization is not required for water based fluids (HWBF).


• Inlet & outlet port options include NPT, BSPP and SAE straight thread O-ring boss to allow easy installation with maximum flexibility.


• O-ring seals are used to provide positive, reliable sealing. Choice of O-ring materials (nitrile rubber, fluorocarbon elastomer, ethylene propylene rubber) provides compatibility with petroleum oils, synthetic fluids, water-glycols, oil/water emulsions, and high water based fluids.


• Screw-in bowl mounted below the filter head requires minimal clearance to remove the element for replacement, and contaminated fluid cannot be washed downstream when element is serviced.


• HYDAC differential Pressure Indicators have no external dynamic seal. This results in a high system reliability due to magnetic actuation, thus eliminating a potential leak point.


• A poppet-type bypass valve (optional) is separate from the main flow path, in the filter head, to provide positive sealing during normal operation and fast opening during cold starts and flow surges.


• For special finishes and coatings – consult HYDAC for minimum quantities, availability and pricing.