DFBH/HC240TE3D1.1/12-B3L24

Hydraulic Pressure Filter

Features
• Non-welded housing design reduces stress concentrations and
prevents fatigue failure.
• Choice of NPT, BSPP, SAE straight thread O-ring boss, and SAE
4-bolt flange porting (sizes 60 - 1320) to allow easy installation
with maximum flexibility.
• O-ring seals are used to provide positive, reliable sealing. Choice
of O-ring materials (nitrile rubber, fluorocarbon elastomer, and
ethylene propylene rubber) provides compatibility with petroleum
oils, synthetic fluids, water-glycols, oil/water emulsions, and high
water based fluids.
• Screw-in bowl or lid (on 2-pc. bowls) mounted below the
filter head requires minimal clearance to remove the element
for replacement and contaminated fluid cannot be washed
downstream when element is serviced.
• HYDAC Differential Pressure Indicators have no external dynamic
seal. This results in a high system reliability due to magnetic
actuation, thus eliminating a potential leak point.
• A poppet-type bypass valve located in the filter head provides
positive sealing during normal operation and fast opening during
cold starts and flow surges. (Optional non-bypass available)
• For special finishes and coatings – consult HYDAC for minimum
quantities, availability and pricing.
• Fatigue pressure ratings equal maximum allowable working
pressure rating.

Features

• Non-welded housing design reduces stress concentrations and prevents fatigue failure.• Choice of NPT, BSPP, SAE straight thread O-ring boss, and SAE 4-bolt flange porting (sizes 60 - 1320) to allow easy installation with maximum flexibility.• O-ring seals are used to provide positive, reliable sealing. Choice of O-ring materials (nitrile rubber, fluorocarbon elastomer, and ethylene propylene rubber) provides compatibility with petroleum oils, synthetic fluids, water-glycols, oil/water emulsions, and high water based fluids.• Screw-in bowl or lid (on 2-pc. bowls) mounted below the filter head requires minimal clearance to remove the element for replacement and contaminated fluid cannot be washed downstream when element is serviced.• HYDAC Differential Pressure Indicators have no external dynamic seal. This results in a high system reliability due to magnetic actuation, thus eliminating a potential leak point.• A poppet-type bypass valve located in the filter head provides positive sealing during normal operation and fast opening during cold starts and flow surges. (Optional non-bypass available)• For special finishes and coatings – consult HYDAC for minimum quantities, availability and pricing.• Fatigue pressure ratings equal maximum allowable working pressure rating.